How to Install the Canon TS3322 Driver
To install the Canon TS3322 driver, you must first agree to the terms and conditions of the company and agree to use its services. After the software has been installed, it will automatically check the status of your printer and begin the process of searching for it in the wireless network.
This process may take several minutes depending on your wireless connection. If you have a cabled or wireless connection, the process will take much less time.
Canon TS3322 Driver does not support photo paper larger than 5 by 7 inches
You can print photos on photo paper larger than 5 by 7 inches using the Canon TS3322 Driver. The printer comes with a photo paper tray insert, but if you have larger photo paper, you may not be able to print on it.
To resolve this issue, you should first determine which type of paper you are using. For example, if you use a 5 by 7-inch photo paper, you should change to a 3.5-inch-by-five-inch photo paper.
In addition to the driver, you should download the Easy-PhotoPrint Editor Software, which allows you to edit photos and publish them on the web. You can also use this software to print photos on a variety of media, such as a memory card or an SD card.
However, you should know that you need to install the driver before you can use the printer. This printer is not recommended for frequent printing, and it only supports a maximum print volume of 6,000 pages per month.
It does not sustain two-sided printing Canon TS3322 Driver
Your computer may not sustain two-sided printing on some devices. In such a case, you can attempt to print on both sides of the page, if the printer allows it.
You may need to change your password or enable duplex printing in System Preferences. Your computer may be holding for authentication, which is a common problem with printers. After you’ve changed the password, you should be able to successfully print on both sides of the paper.
It does not support printing from SD cards
The printer does not support printing from SD cards in some cases, this can cause by a bad read of the SD card. they such cases, the printer stops in the middle of printing without any error message. In such cases, the X-axis motor cables are too close to the SD card board and interfere with the signal.
For this problem to solve the cables must be moved to the right-back hole in the frame. The D4S printer uses a different location for the cables.
You can fix the issue by installing a patch for your SD card. The patch to require if you are using Windows Vista or another operating system with an SD card. If you’ve tried the solutions above, but the problem still persists, check your card’s settings.
Most SD cards have a write-protection feature that prevents unauthorized changes. In such cases, the switch for this feature should point to “LOCK.”
It requires an internet connection to install its driver
If you do not have an internet connection, you can download the driver of your PC by downloading it from the manufacturer’s website. Some drivers are customized for specific hardware models, so be sure to visit the manufacturer’s website to get the driver you need.
there are also download the driver to an external disk or USB flash drive to install it on a PC without a network connection. When you download the driver, make sure that you have it in self-install format. To install the driver, you must have the model of the PC, its network card, and the operating system on which it installs.
Another way to install a driver is to use an installation package. This method is easier than the previous option, but you will need a working internet connection and another PC to complete the task.
If you have a network card, you can download its driver from the manufacturer’s website by searching for the model number. Then, you can copy the downloaded network driver to a USB device and plug it into your computer.